- 4 -
tousek
/ EN_REX-Force_01 / 25. 03. 2020
1. General
REX Force
Product features
REX Force
Suitable for heavy duty use (100% duty/cycle)
Large, illuminated LC-Display (2x16 characters)
Clear text menu programmable via four buttons
Operation mode is selectable (Impulse, Automatic, Deadman)
Free adjustable partial opening (also for 1 leaf)
Traffic light function in combination with the traffic light
controlSTA 11 (one way traffic or two way traffic regulation)
Distance measurement via absolute encoders (no limit
switches), no need of learning the way after unlocking or
blackout.
Adjustable soft stop (distance and speed
Adjustable speed (separately for OPEN and CLOSE),
controlled by a frequency converter
Motor locking function with optional motor locking module
Mechanical brake for safe gate stop
Electronic monitoring of emergency release
Direct connection of separate 8,2 kΩ safety contact edges
(inside/outside)
Input for gate back area surveillance
Separate input for I-loop detectors
Status display for safety inputs and push button inputs
Self-monitoring of photocell
Connection slot for radio receiver
12Vd.c. flashing light output
Integrated event message contact
Optional, external gate status display (e.g. for concierge)
Optional courtyard lamp module (230V, 100W)
Function
REX Force
The control unit can be adjusted in 3 logic modes:
•
Impulse mode:
with open and close switch function
•
Automatic mode:
automatic closing
•
Dead-man mode:
gates moves as long as switch/button is pressed
Depending on the door situation (1 or 2 leaves), the main control unit ST REX gets connected via BUS cables to one or two ST
REX smart motor control units. The ST REX smart manages the brake, the emergency release, the motor and the frequency
converter and has two inputs for the direct connection of 8.2 kΩ contact strips (separated for inside / outside). Furthermore,
the ST REX has a traffic light function when used in combination with the traffic light control STA 11. The connection to the STA
11 is also established via a BUS line (
page 16, 41
).
Technical data
REX Force
supply voltage
230V a.c. ±10%, 50Hz
weight REX Force
99kg
motor voltage
3 x 230V a.c.
max. wing width
12m
max. current consumption
2A (excl. accessories)
max. wing weight
1500kg
travel speed
1,3°/s –3°/s
internal limit stops up to
max. 6m wing width, max. 700kg per wing
(external limit stops for higher values necessary!)
nominal torque
2000Nm
max. torque
3500 Nm
ambient temperature
-20°C to +40°C
duty cycle in S1 mode
100%
emergengy release
output photocells
24Va.c.
Motor bolt output
24V d.c. (optional with module)
flashing light output
230Va.c. und 12Vd.c.
(über Blinkprint)
magnetic clamp output
24Vd.c. (optional with module)
force adjustment
frequency converter
Article no.
11260500
Optional equipment
pluggable receiver • flashing light module • additional module for courtyard/control lamp • additional
module for gate status • motor bolt module • traffic light control unit
Note: the max. leaf widths here indicated are for wind permeable and non-raising gates!
• To esnsure a perfect operation an all-current-sensitive residual current circuit breaker
type B must be used!
• DANGER: Please note that due to the big mass of the gate and its high speed, a huge kine-
tic energy gets generated. This must be necessarily taken into account when planning and
constructing the gate. The external limit stops and the mechanical construction have to be
dimensioned accordingly!
