If the water does not flow due to a water service interruption
■
Replacing the batteries
1
Unplug the power plug.
<Power>
2
Remove the remote control from the
hanger.
(Page 14)
3
Open the battery cover and replace two
AA batteries.
(Page 14)
•
The low battery warning mark is unilluminated.
4
Mount the remote control in the hanger.
5
Insert the power plug.
•
The "Power" LED lights up.
If you cannot operate with the remote control
Attention!
•
"ON" and "OFF" settings of the functions such as the energy saver function may be canceled when the batteries
are replaced. Set them again.
■
If the low battery warning mark "
" on the back
of the remote control is flashing, please replace the
batteries.
It is the time to replace
the batteries.
1
Use a bucket to flush water.
2
If the water level is low after
flushing, add more water.
•
Prevents odors.
• When the water supply is restored, be sure to perform a flush.
(To prevent waste from remaining in the drain pipe.)
Attention!
Newspaper,
dust cloth, etc.
Large bucket
Pour strongly,
aiming at the center
of the bowl unit.
What to Do?
If the water does not flow due to a water service interruption
If you cannot operate with the remote control
(Until the water level does not rise)
Make sure to also check the instruction manual of your bowl unit.
38
An explanation has been added due to the
development from Japan.
Please check the translation.
＜日本語訳：お使いの便器の取扱説明書を
あわせてご確認ください。＞
An explanation has been added due to
the development from Japan.
Please check the translation.
＜日本語訳：水位が上がらなくなるまで＞
✓
✓
