Maintenance
Gap between the Main Unit and Bowl Unit
[SW3084T40]
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.
Soft cloth soaked
in water
Toilet paper, etc.
(May cause damage.)
1
Unplug the power plug.
If the power is not unplugged,
the product may malfunction or
cause a failure or electric shock.
2
Remove the main unit.
•
Do not pull the unit with undue force. (because the water supply hose and power cord are attached.)
(1) Pull the main unit toward you while pressing
the "Main unit removal button".
Main unit
removal button
Top of the bowl unit
Water supply hose
Power cord
Base plate
Bolt
(2) Lift up the main unit.
•
Do not excessively bend the water supply hose.
3
Clean the top of the bowl unit and the bottom of the main unit.
•
Wipe with a soft cloth soaked in a diluted, pH neutral kitchen detergent. Then, dry the surface with
a soft cloth soaked in water so that no detergent remains.
4
Mount the main unit.
(1) Lift the main unit, then lower it straight down while threading the power
cord and water supply hose into the recess on the bowl unit.
•
Be careful not to pinch the power cord.
•
Do not excessively bend the water supply hose
(2) Align the main unit with the center of the base plate and press it
firmly onto the base plate until a click sound is heard.
Click
Base plate
After mounting, check that the main unit does not
detach even when pulled.
CAUTION
Push the main unit firmly on to the base plate until a
click sound is heard.
(Doing so may cause the main unit to come loose and fall,
resulting in injury.)
5
Insert the power plug.
•
The "Power" LED illuminates.
34
