background image

1

Questions, problems, missing parts? 

Before 

returning to your retailer, call our customer service 

department at 1-800-288-4002, 6 a.m. - 5 p.m.,PT 

and 9 a.m. - 8 p.m.,ET,  Monday - Friday.

TUB FILLER FAUCET

Jacuzzi Item # NW 55826 / NW 55827

MODEL # 67661-X5104 / 67661-X5101 

 

ATTACH YOUR RECEIPT HERE

Serial Number ___________________  
Purchase Date ___________________  

2017/05/25 V1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate, or install the product. 

 

WARNING:

•   

Follow the installation instructions carefully. Proper installation is the installer’s responsibility.

 

•   

Failure to follow correct installation procedures can result in the faucet being loose, which can result in serious injury. 

•   

Not suitable for installation in concrete floors.

 

 

CAUTION:

 

•   

Check local building codes before beginning installation to ensure compliance.

 

PREPARATION

Before beginning the assembly of this product, make sure all parts are present. Compare parts with the package 

contents and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.   

Estimated Assembly Time: 

90 minutes (including removal of old faucet)

Tools Required for Assembly (not included): Adjustable Wrench, Silicone Sealant, Phillips Screwdriver, Pencil, Electric Drill

Summary of Contents for 67661-X5104

Page 1: ...efully Proper installation is the installer s responsibility Failure to follow correct installation procedures can result in the faucet being loose which can result in serious injury Not suitable for installation in concrete floors CAUTION Check local building codes before beginning installation to ensure compliance PREPARATION Before beginning the assembly of this product make sure all parts are ...

Page 2: ...h the flexible supply lines 1 through the prepared hole and then holding the escutcheon 2 secure the standpipe 3 Note If mounting into wooden floor secure the standpipe 3 using screws 4 only wall plugs are not needed If mounting into solid floor mark the position of holes first and then secure the standpipe 3 using anchors 5 and screws 4 Where requried ensure correct anchors for your floor type ar...

Page 3: ... away any debris that could cause damage or blockage to internal parts Check for water leaks After flushing completely shut off water and attach the hand shower to the hose The diverter pin button 1 should auto reset back into the outward position Retighten water hose supply connections if necessary but be careful to not overtighten to prevent damage Instructions for using of the Diverter During u...

Page 4: ...nufacturer agrees to correct such defects at no charge or at our option replace the faucet with a comparable or superior model To obtain warranty service call our customer service department at 1 800 288 4002 for return authorization and shipping instructions You may be required to present a copy of your sales receipt as proof of purchase All cost of removal and reinstallation are the expressed re...

Reviews: