background image

Rear washing, Rear soft washing, Front washing and Wand

Trouble

Please check

Ref. 

Page

The wand  

(or washing water) 

does not come out

 

Has the toilet been sat on and used continuously for 2 hours or longer? (If so, 

operation is stopped for safety purposes.)

 

Stand up from the seat and then use again.

-

 

The seat switch will not turn on unless you sit on the seat properly.

 

Sit back on the toilet seat.

11

 

Are you using a toilet seat cover, a toilet lid cover or 

a seat for infants?

 

Remove any covers.

When using a seat for infants or a soft highchair, 

remove after each use.

Covers

11

 

Are you pressing "Wand CLEAN" button?

 

When you press "Wand CLEAN" button, "" comes out from the 

vicinity of the wand to clean the wand.

 

To clean the wand with it extended, perform "Wand cleaning".

36

The wand extends but 

the washing water 

does not come out / 

The washing water 

pressure is weak

 

Has a water failure occurred?

 

Press "Stop" button on the remote control and wait until water service is 

restored.

-

 

Is the shutoff valve closed?

 

Fully open the shutoff valve.

15

 

Is the water filter drain valve clogged with foreign matter?

 

Clean the filter.

37

 

Is the water pressure set to a low level?

18

 

Is the water drain plug loosened?

 

Tighten the water drain plug securely.

40

The washing water is 

cold

 

Is the warm water temperature set to "OFF" or a low level?

 

When the temperature of the water supply or the bathroom is low, the water 

temperature may be low when first sprayed.

 

Is the timer energy saver in operation?

 

The energy saver feature is on when the "Energy saver" LED is on and the 

"Power" LED is off on the main display.

  When you sit on the seat, the warm water heater is temporarily turned on 

and water is warmed in about 10 minutes.

 

When the timer energy saver is set to "ON", you can also turn it "OFF".

20

-

22, 23

25

Wash functions 

stop unintentionally 

during use

 

"Rear washing", "Rear soft washing" and "Front washing" stop automatically 

after 5 minutes of continuous use.

 

Does the seat switch have difficulty detecting?

 

Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on 

the seat, the seating switch may temporarily stop detecting your presence.

-

11

Water comes out 

unexpectedly from 

the wand

 

Water may sometimes come out from around the wand when it expands in 

the warm water tank.

 

Is the "Wand CLEAN" LED on the main display flashing?

 

"Auto Wand CLEAN" starts and the wand is being cleaned.

-

16

43

Reference

Summary of Contents for WASHLET SW3084

















































Reviews: