17
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
UNFOLDING
4.
Grasp the upper rails near the tower and raise them to a level between 10
and 14.
Grasp Here
5.
Remove the folding foot holder from the squat stand and install it on
the upper rails. (Reference Assembly and Set-up Instructions for complete
installation instructions of folding foot holder).
6.
Rotate the squat stand up by pulling the squat fold pull pin on the left lower
rail (while facing tower). Adjust to desired height.
Squat Fold Pin
7.
Remove the center cable pulley from the back of the tower and attach it to
the glideboard when needed for pulley exercises.
