18
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
ELEVATE
®
ENCOMPASS
TM
OWNER’S GUIDE
TSS & FOLD PLATFORM
ADJUSTING THE TELESCOPING SQUAT STAND
1.
Lift the release lever on the back of the telescoping squat stand. Adjust
the squat stand to the desired level by aligning it over one of the sets of holes
in the folding platform. Release the lever to lock it in place.
FOLDING THE FOLDING PLATFORM
1.
Pull the pin on the left side then fold the squat stand down. Reverse the
process to unfold or rotate it out for use.
2.
Inspect the lever and pull up on the squat handle to ensure the squat stand
is locked in on both sides.
TELESCOPING SQUAT STAND AND FOLDING PLATFORM
REMOVING THE FOLDING PLATFORM
1.
Remove the squat stand from the folding platform posts and set it aside.
2.
Pull the squat fold pull pin on the left side as shown and tilt the folding platform
slightly toward the glideboard as shown below.
Squat Fold Pull Pin
3.
Pull the pin on the right side of the folding platform and rotate the posts to the
left until the right pin is slightly above the rails.
4.
Move the folding platform to the left until the fixed pin on top comes out of the
hole in the lower rail, then lift off the folding platform.
NOTE:
This process may be done with the squat stand still attached to the folding
platform, however it is more difficult and requires familiarization, more strength and
dexterity.
