Reference Information
2-4
Toshiba
CONNECTIONS
Plug & Auto Set Up
11
CONNECTIONS
66
Plug & Auto Set Up
3
2
1
Your VTR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory.
The process takes a few minutes. Your VTR will then be ready for use.
Connect the coaxial cable.
Plug the VTR into the mains. A message
appears “AUTO SET-UP WILL BE
STARTED. CHECK ANTENNA
AND TV CABLE CONNECTION”.
The process will finish after a few
minutes. Then the date and time are
set automatically from the broadcast
signal, but this function will not
operate if there is no teletext signal.
R
L
AUDIO
OUT
TV
AV2(SATELLITE) IN
AV1(EURO AV)
Aerial Cable
Aerial
Cable
SCART Lead
Power Cable
Aerial Output
(to TV)
Aerial Input
(from Antenna)
Remember, connect
this first
SCART
IN/OUT
VTR
AUTO SET-UP WILL BE
STARTED.
CHECK ANTENNA AND
TV CABLE CONNECTION
END:
MENU
AUTO SET UP
I
˚˚˚˚˚˚˚˚
----------I
60%
END:
MENU
PLEASE WAIT
NOW SETTING THE CLOCK
END:
MENU
MON
¥
CLOCK
12:00 1/JAN/2001
AUTO CLOCK : ON
PROCEED:
OK
By means of 21-pin Scart Cable:
If both your TV and Satellite receiver have a SCART, use a SCRAT cable (not supplied) to connect the VTR.
CONNECTIONS
10
CONNECTIONS
Satellite Receiver
Connecting a Satellite Receiver
66
This VTR can be connected to your satellite receiver and you can enjoy watching or recording satellite programmes through
the VTR.
R
L
AUDIO
OUT
TV
AV2(SATELLITE) IN
AV1(EURO AV)
TV
Aerial
Satellite Receiver
SCART cable
SCART cable
Aerial connector
21-Pin Scart Terminal
By means of RF Coaxial Cable:
After making this connection, you must preset the station received through the satellite tuner. And proceed with the satellite
setting.
TV
R
L
AUDIO
OUT/
TV
AV2(SATELLITE) IN
AV1(EURO AV)
Satellite receiver
Aerial
RF IN
RF OUT
(Not supplied)
Aerial connector
SCART cable
