Toshiba V631UK, Owner'S Manual

Page: 9 / 21

Reference Information
2-8
Toshiba
19
GETTING STARTED
Clearing a Preset Station
66
Clearing a preset station
If you have stored a TV stations:
•
That you do not require
•
At the wrong programme position
You can cancel it
GETTING ST
AR
TED
1
Press MENU on the remote control.
Result : The programming menu is displayed.
Press the corresponding
›
,
‚
or
¥
,
Š
buttons to select the
INSTALLATION option.
Press the OK button to select this option.
Result : The INSTALLATION menu is displayed.
Press the
›
or
‚
buttons to select MANUAL SET UP option.
Press the
Š
buttons to select this option.
Result : The TV STATION TABLE menu is displayed.
Press the corresponding
›
or
‚
buttons, until the required preset
TV station is selected. (PR)
Press the CLR/RST button.
Repeat the same procedure from step onward until all the
required stations have been cleared.
On completion, press MENU three times to exit the menu.
COUNT.RST
F.ADV CLR/RST
AUDIO
OK
DISPLAY
CURSOR
BONUS LANG
END: MENU
›‚¥Š
INSTALLATION
OK
CLOCK
OPTIONS PROG INSTALL
END: MENU
›‚Š
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
2
3
4
5
** TV STATION TABLE **
›‚Š
MENU
SWAPPING: OK
PR CH NAME
1 002 ----
2
3
4
5
DELETE: CLR/RST
6
7
8
9
GETTING ST
AR
TED
18
GETTING STARTED
Installation
continued
Presetting the stations manually
66
8
Press
¥
or
Š
button to start scanning.
Result : The frequency band is scanned and the first station
found is displayed.
If you know the number of the channel you want, press the
numeric buttons on the remote control for example, for channel
E21, first press “0” and then press “2”, “1” (see page 42).
Press the › or ‚ button to select MFT. This is useful when the
channel scanned is not clear. Press
¥
or
Š
button to adjust for
clear signal reception.
Press the › or ‚ button untill NAME is selected.
The station name is set automatically from the broadcast signal.
To change the programme’s name, press the Š button.
Result : The first letter of the name flashes.
To... Then...
Select a character
♦
Press the › or ‚ button until the
in the name required character is displayed.
(letter, numbers or “-” character).
Move to the next or
♦
Press the ¥ or Š button
previous character respectively,
If you... Then...
Wish to store the ♦ Press the corresponding
›
or
‚
stations displayed button, until the MFT is selected.
♦
Press the ¥ or Š buttons to adjust
the picture, if necessary.
♦ Press OK to store the station.
Do not wish to
♦
Press the corresponding › or ‚
store the station button, until the CH is selected.
displayed ♦ Press the
¥
or
Š
button to go on
scanning the frequency band and
display the next station.
♦ Go back to the beginning of step 14
Repeat this procedure from step 6 onward, until all the required
stations have been stored.
On completion, press the MENU button three times to exit the menu.
9
10
11
12
13
15
14
COUNT.RST
F.ADV CLR/RST
AUDIO
OK
DISPLAY
CURSOR
Note: To enable the VTR to decode a scrambled TV station,
the decoder must be switched on