Reference Information
To
shiba
2-9
GETTING ST
AR
TED
21
GETTING STARTED
Satellite Monitor Functions
66
For satellite receiver with only ONE SCART socket:
If the satellite receiver has only one Scart output, Connect it to the BLUE input socket on the VTR. Use another Scart lead
to connect the AV1 (EURO AV) socket on the VTR to the TV
Satellite monitor functions
Note: To view satellite when video is in standby or (not ECO.MODE)
recording a television station:
If the Satellite receiver has two SCART outputs, one to
the VTR and another to the TV, you do not need to use
this function.
AUDIO
OK
1
Press the SAT.MONI. button on the remote control once to
select the AV2 (SATELLITE) IN scart. This will loop the satellite
signal through the VTR up to the television.
If it has not been automatically selected, select the SCART
socket on the television. (refer to TV Owner’s Manual)
To cancel press the SAT.MONI. button again.
Note:
If you press MENU on the remote control the Satellite
Monitor function will be canceled.
3
2
GETTING ST
AR
TED
20
GETTING STARTED
Changing the Preset Station Table
66
1
2
3
4
5
Changing the preset station table
You can rearrange the preset TV stations according to your own preferences programme number assigned to the station.
Press MENU on the remote control.
Result : The programming menu is displayed.
Press the corresponding
,
or
¥
,
buttons to select the
INSTALLATION
option.
Press the OK button to select this option.
Result : The INSTALLATION menu is displayed.
Press the
or
buttons to select MANUAL SET UP option.
And then press the
button to select this option.
Result : The TV STATION TABLE menu is displayed.
Press the corresponding
or
buttons, until the required preset
TV programme is selected.
Result : The selected station is displayed at the same time on the
television screen.
To change the programme number
assigned to station press the OK
button on the remote control.
(For example, To move a TV
station in programme 1 to
programme 3)
Press the
or
button to select required position. And then
press OK again to swap the position.
You can modify this station by repeating the same procedure
from step 5 onwards.
On completion, press the MENU button three times to exit the
menu.
BONUS LANG
END:
MENU
¥
INSTALLATION
OK
CLOCK
OPTIONS
PROG
INSTALL
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
:CH36
** TV STATION TABLE **
MENU
SWAPPING:
OK
PR
CH
NAME
1
002
----
2
3
4
5
DELETE:
CLR/RST
** TV STATION TABLE **
MENU
SWAPPING:
OK
PR
CH
NAME
1
2
3
002
----
4
5
DELETE:
CLR/RST
6
7
8
9
COUNT.RST
F.ADV
CLR/RST
AUDIO
OK
DISPLAY
CURSOR
