background image

Reference Information

To

shiba

2-17

37

BASIC OPERATION

Searching for a Specific Sequence

Searching for a Specific Sequence

66

Each time you record a cassette on this VTR, an “index” is automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows: 

BASIC

OPERA

TION

1

To search for a specific index, press INDEX.

Press the REW (     ) or FF (     ) buttons depending on the
direction where your desired programme is located.

When an index mark is found the VTR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.

If you want to watch the tape from a particular Index, simply press
PLAY.

s

q

2
3

4

Prev Seq. being Next

etc. Seq.

Played

Seq.

etc.

2        1

1

2

INTRO SCAN

Index Skip Search :

This feature will enable you to fast forward/rewind to a specific point

on a tape : E..g. If you have recorded 3 different programmes on a

tape and you have rewound the tape to the beginning, by using this

feature you can go directly to the start of programme 2 simply by

pressing the INDEX button.

1

Press the INDEX to start the Index search.

Press the REW (     ) or FF (     ) buttons twice more, This will take
you directly to the desired programme is located.

These Index searches can be made forwards: (press       ) or
backwards: (press       ).

To cancel an Index search simply press the PLAY or STOP button.

2

3
4

s

q

q

s

INDEX

 

:

 

¥¥ Š

Š

INDEX SEARCH:    +01

Š

Š

COUNT.RST

F.ADV

CLR/RST

AUDIO

OK

DISPLAY

CURSOR

BASIC

OPERA

TION

36

BASIC OPERATION

Picture Search, Fast Forward/Rewind

66

Picture Search, Fast Forward/Rewind

Picture Search enables you to Fast Forward or Rewind and look for a particular part of a tape.

1

Press PLAY, the VTR will enter normal play mode. While in play
press and release the FF (or REW) button. The VTR will search at
5 times the normal playback speed.

To return to normal playback mode, press the PLAY (

Š

) button.

If you press and HOLD down the FF (or REW) button the VTR
will search at 9 times the normal speed. Releasing the FF (      )
button will return the VTR to search at 5 times the normal speed.
To return to normal playback mode, press the PLAY (

Š

) button.

Whilst in Picture Search mode, if you press the FF (      ) button
again, the VTR will enter normal Fast-Forward mode.

Likewise, whilst in Picture Search REW mode, if you press the
REW (      ) button again, the VTR will enter normal Rewind
mode.

If, when Redwing (REW) or Fast Forwarding (FF), you press the
REW (or FF) button, the VTR will enter the Picture Search mode.

s

s

q

2
3

4
5

6

COUNT.RST

F.ADV

CLR/RST

AUDIO

OK

DISPLAY

CURSOR

Summary of Contents for V631UK






















Reviews: