Reference Information
To
shiba
2-19
41
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
Using the tape Counter
Using the Tape Counter
The tape counter :
♦
Indicates the elapsed time in the play and record modes (hours, minutes and seconds)
♦
Is resert when a cassette is inserted in the VTR
♦
Allows you to find the beginning of a sequence easily.
66
1
Insert a cassette in your VTR.
To set the tape counter to zero at the beginning of a sequence:
♦
Press DISPLAY twice to display the counter
♦
Press CLR/RST when you want to set the tape counter to zero
When you are ready,
♦
Start playback or Recording
♦
Press the STOP button.
♦
To fast-forward or rewind to the sequence at which the
counter was net to zero, press REW ( ) or FF ( ).
0:00:00
COUNT.RST
F.ADV
CLR/RST
AUDIO
OK
CURSOR
s
q
2
3
Note:
Some VTR information, such as the counter, can be displayed on the
television screen (unless you have deactivated the OSD mode; refer
to page 14).
Press DISPLAY :
♦
Once to display the current function, programme number,
recording, speed, date, time and counter
♦
Twice to display the counter only
♦
Three times to display the time remaining on the cassette
♦
Four times to clear the display.
Press COUNT/TR
♦
Once to display the counter
♦
Twice to display the time remaining on the cassette
To fast-forward or rewind to reach the tape end or start position the
counter display has to clear.
40
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
Other Function and Useful
Recommendations
continued
ECO Mode-Reducing Standby power consumption
Low Power Mode reduces the Standby power consumption of the VTR when is Standby mode.
Useful, for example, when you are away from the house on holiday. It saves actually turning the VTR off.
66
1
Press MENU on the remote control.
Result : The programming menu is displayed.
Press the corresponding
,
or
¥
,
buttons to select the
USER SET
option.
Press the OK button to select this option.
Result : The USER SET menu is displayed.
Press the corresponding
or
buttons, until the ECO. MODE
is selected.
Press the
button to turn LOW (3Watts) mode on. Now, when
the VTR is standby mode the front display panel will shut off. Even
the clock disappears. By pressing the ON/STANDBY button
again the display panel will reappear.
On completion, press MENU twice to exit the menu.
2
3
4
5
6
PROG INSTALL
BONUS LANG
END:
MENU
¥
USER SET
OK
CLOCK
OPTIONS
END:
MENU
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM :AUTO
FORMAT 16:9
:AUTO
NICAM
:ON
ECO.MODE
:OFF
COUNT.RST
F.ADV
CLR/RST
AUDIO
OK
DISPLAY
CURSOR
