Toshiba TOSVERT VF-S15 series, Instruction Manual

Page: 25 / 394

E6582175
A-13
1
M3.5 screw
Grounding terminal
(M4 screw)
Shorting-bar
For EMC plate
Grounding terminal
(M4 screw)
Grounding terminal
(M5 screw)
1.3.3 Power circuit and control circuit terminal blocks
1) Power circuit terminal
In case of the crimp-style terminal, cover the crimp-style terminal with insulating tube, or use the crimp-
style terminal with insulation sleeve.
Refer to section 2.3.1 for details about terminal functions.
Screw Size
Crimp-style
terminal
Note1)
Tightening torque
M3.5
xxx
–
3.5
1.0 N  m 8.9 lb  in
M4
xxx
–
4
1.4 N  m 12.4 lb  in
M5 xxx – 5 2.4 N

m 20.8 lb

in
M6
xxx
–
6
4.5 N  m 40.0 lb  in
M4 (grounding terminal)
xxx – 4
1.4 N  m 12.4 lb  in
M5 (grounding terminal)
xxx
–
5
2.8 N  m 24.8 lb  in
Note1) xxx means wire sizes. For the wire sizes, refer to the table in section 10.1
VFS15-2004PM-W1 to 2007PM-W1
Note1) Bend the clips on the wiring port of the terminal cover to connect the PB, PO, PA/+, and PC/- terminals.
Note2) Be careful to insert all wires into the cage of terminal block.