Toshiba TL9 Digital Series Owner'S Manual Download

Page: 82 / 102

CONTROLS AND FEATURES

glis

Software Upgrade and Licences

If preferred, software upgrades can be searched for manually

using

Search for New Software

In the

System Setup

menu, press

to select

Software Upgrade

and press

Press

to select

Search for New Software

Press

. The television will automatically start

searching for a software upgrade, the progress bar
will move along the line.

If an upgrade is found, the television will
automatically start downloading. If not, a screen will
appear stating that an upgrade is unavailable.

TOSHIBA may offer upgrades for the TV’s software in the future.

The TV’s software is upgraded via the Network.

Before downloading software:

Configure your TV to connect to the Internet.

NOTE:

While the upgrade is being performed, you will not be

able to watch the TV.

In the

System Setup

menu, press

to select

Software Upgrade

and press

Press

to select

Network Upgrade

and press

NOTE:

If the network is not available, a warning

message will appear.

The TV software upgrade will start when download
succeeds.

The licences for the software used in this television are available

for viewing.

In the

System Setup

menu, press

to select

Software Licences

and press

A screen will appear displaying all the licensing
information required for the televisions software.

System Information and Reset TV

This feature can be used to check the version of software

currently installed. When in DTV mode, it includes additional

diagnostic information such as signal strength, signal quality,

centre frequency, modulation, etc.

In the

System Setup

menu, press

to select

System Information

Press

to display the

System Information

For information about the signal quality of a particular
multiplex, press

to select that multiplex.

Press

for a screen showing detailed technical

information about the selected multiplex.

Selecting

Reset TV

will reset all TV settings, including saved

channels, to their original factory values.

In the

System Setup

menu, press

to select

Reset TV

Press

to select. A screen will appear warning that

all settings will be lost. Press

to continue.

When the set powers back on, the

Quick Setup

screen will appear. Press

to advance the setup and

perform an auto tune. (See “Quick Setup” section on
page 16.)

Searching for New Software

Network Upgrade

Software Licences

SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.

48 %...

CH 31

System Information

Reset TV

System Information

2012

6.8.05.1 Jan 19 2012 - 53. 5. 73. 5

MBOOT Version : xxxxxxxx

WEAK

CH 25

GOOD

CH 33

GOOD

CH 67

GOOD

AVERAGE

STRONG

TOSHIBA

Summary of Contents for TL9 Digital Series







































































































Search results

Summary of Contents for TL9 Digital Series

Reviews:

Related manuals for TL9 Digital Series

Brands by name

Popular brands

Toshiba TL9 Digital Series, Owner'S Manual

Search results

Summary of Contents for TL9 Digital Series

Reviews:

Related manuals for TL9 Digital Series

Brands by name

Popular brands