52
CONTROLS AND FEATURES
En
glis
h
• The power consumption during Active Standby is more
than it during Normal Standby.
• After the change from Power On state to Active Standby,
there may be a period of several ten seconds which does
not receive the operation from a remote control or external
apparatus.
The TV can be configured as a Media Renderer(DMR). When
operating as a DMR, the TV displays content provided by a DMS.
The selection of the media is done by DMC.
The TV can play photo, movie, or audio files when operating as a
DMR.
a
In the
Preferences
menu, press
B
or
b
to select
Network Device Setup
and press
OK
.
b
Press
B
or
b
to select
Media Renderer Setup
and
press
OK
.
c
Press
B
or
b
to select
Media Renderer
and press
C
or
c
to select
On
.
If request come from DMC, prompt will appear and DMR will
start.
To exit the Media Renderer:
Press
EXIT
.
Terminology
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
NOTE:
You cannot use 3D function in operating as a DMR.
The TV’s device name can be changed.
a
In the
Preferences
menu, press
B
or
b
to select
Network Device Setup
and press
OK
.
b
Press
B
or
b
to highlight
Device Name Setup
and
press
OK
.
c
Highlight the
Device Name
field and press
OK
. The
Software Keyboard window will appear.
d
Input the Device Name by using the software
keyboard (see page 50). Press the
BLUE
button.
NOTE:
The Device Name can be up to 15 characters
long.
e
Highlight
Done
and press
OK
to save your setting.
USB HDD Record Function
This function can be used to record and play digital
broadcast programmes. Read the precautions
below before recording or viewing programmes
using the USB HDD record function.
NOTE:
• In order to use this function, a USB HDD needs to be
connected to the TV. Do not use USB Hub.
• After recording operation, time may take to a recording
start.
• Recorded programmes saved on the USB HDD can only be
viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.
• You cannot watch one channel while recording another.
• If the recording time to the USB HDD is too short, no data
may be saved.
• You cannot record video input signals on the USB HDD.
• Not all types of broadcast may be recordable.
• After programming the TV to record digital broadcasting,
do not disconnect the power plug before recording starts.
Also, leaving the power switch “
ON
” until recording is
scheduled to start, may cause the recording to fail.
• Should video or audio recording fail due to malfunction of
the TV or poor reception, no compensation shall be paid.
• If there is a power failure or the power plug is disconnected
during programmed recording, recording will stop and will
not resume when the power returns or the plug is
reconnected.
• Do not disconnect the power plug when the indicator LED
is lit.
• Any changes implemented by the broadcasting station may
affect programme scheduling.
• Scheduling of multiple consecutive programmes may result
in the beginning of each programme not being recorded.
• Accurate start / finish time for recording is reliant on
broadcasters maintaining correct time stamp if this not the
case the recording will fail.
• Some broadcasters can control whether a program can be
recorded or how long you may be able to view it for after
recording. The on screen message “Retention limit expired”
means that the time limit for viewing the program has
lapsed.
• Programmed recording cannot take place if the power plug
is not connected.
• Disconnecting the power plug during recording may result
in failure to save the recorded programme.
• USB HDD recording feature is not available in all countries.
• Do not turn off the TV during recording.
• When the USB HDD is formatted, all the data stored on the
HDD will be erased.
Media Renderer Setup
Device Name Setup
