18
SETTING UP YOUR TV
En
glis
h
o
Press
OK
. If your country supports Network Guide,
The
Guide Type
screen will appear.
Press
C
or
c
to select
Broadcast Guide
or
MediaGuide
.
NOTE:
If you select
MediaGuide
, it may take time to
access the Guide screen depending on active channel
numbers.
p
Press
OK
. If the
Ant/Cable/Satellite
screen appears,
press
B
or
b
to select
Antenna
,
Cable
or
Satellite
and then press
OK
to check (
).
If DVB-C is not supported in your area,
Cable
will not
be displayed.
• When you select
Antenna
or
Cable
, follow steps 17
to 20.
• When you select
Satellite
, skip to step 21.
• When you select
Antenna
(or
Cable
) and
Satellite
,
the Satellite Settings startup screen will appear
automatically after completing the
Antenna
(or
Cable
) scan and pressing
OK
.
q
Select
Next
and press
OK
. The
Auto Tuning
start up
screen will appear with the option to select between
DTV and ATV
,
DTV
or
ATV
if available. Use
C
or
c
to
select the appropriate mode.
r
Press
B
or
b
to highlight
Start Scan
, and then press
OK
.
The television will start to search for available
DTV
and/or
ATV
channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
When the search is complete, the television will
automatically select channel one.
The
Auto Tuning
screen will display the total number
of services found.
s
Press
C
or
c
to view the
DTV
(digital channel) or
ATV
(analogue channel) lists.
T
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
In
ATV
mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
.
REMEMBER:
Press
TV
at any time to select between
ATV
and
DTV
modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting
in the
DTV Settings
screen.
u
Select
Next
and press
OK
. The
Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually.
Select
Switch Type
and choose the correct switch
configuration for your satellite dish from the settings
None
,
ToneBurst
,
DiSEqC 2way
,
DiSEqC 4way
or
Single cable
.
TV Guide Selection
Broadcast Guide
Electronic Program Guide accessed by the “GUIDE” key of your
remote control:
Select “MediaGuide” if you want to use the advanced rich media
EPG provided through the network.
*Your TV must be connected to the network.
Select “Broadcast Guide” if you want to use the simple EPG
provided by our local broadcast network, if any.
Ant/Cable/Satellite
Cable
Satellite
Next
Antenna
Auto Tuning - Antenna
Progress
Found
ATV Tune
Waiting...
: C7
Channel
DTV Tune
3 %
2
Satellite
No.
Dish
LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
1
1
Transponder: 1/85 (10729 MHz)
Dish Type: Fixed
Lower LOF: 9750
Upper LOF: 10600
Switch Type
None
LNB Power
On
Done
