Toshiba Tecra A3 User Manual Download Page 132

Page: 132 / 253

132

Expansion Options

Connecting a local printer

Click Add Printer.

The Add Printer Wizard appears.

Sample Add Printer Wizard dialog box

Click Next.

The Add Printer Wizard asks you to select your printer.

TECHNICAL NOTE: If your printer is Plug and Play, the
Windows

XP operating system recognizes it automatically.

You can ignore the remainder of this section. See your printer
manual.

If the printer you are setting up:

❖

Is not connected to a network, select Local printer
attached to this computer.

❖

Is connected to a network, select Network printer, or a
printer attached to another computer.

Click Next.

The Add Printer Wizard looks for a Plug and Play printer. If it
does not locate one, click Next.

The Add Printer Wizard prompts you for the printer port.

Summary of Contents for Tecra A3






























































































































































































































































Search results

Summary of Contents for Tecra A3

Reviews:

Related manuals for Tecra A3

Brands by name

Popular brands

Toshiba Tecra A3, User Manual

Search results

Summary of Contents for Tecra A3

Reviews:

Related manuals for Tecra A3

Brands by name

Popular brands