3-42
Drive number select (1:#1,2:#2) ?
(2)
Select a drive number and press
Enter
. The following message will appear.
Interleave number (1/1-8) ?
(3)
Select an interleave number (usually 1) and press
Enter
. The following message
will appear.
[ HDD TYPE ] : CYLINDER = xxxx
[ HDD TYPE ] : HEAD = xx
[ HDD TYPE ] : SECTOR = xx
Press [Track number (CCCCHH) key ?
(4)
Type the four-digit track number and press
Enter
. The first three digits are the
cylinder number and the last digit is the head number. This formats either good
tracks or bad tracks as selected.
NOTE: This function can format only one track per operation. Repeat the operation as
many times as necessary to format several good tracks or bad tracks.
(5)
After a track on the hard disk has been formatted, the following message will be
displayed.
Format complete
(6)
Press
Enter
to return to the HARD DISK FORMAT menu.
4.
Bad track CHECK option
(1)
When this option is selected, the following message will appear.
Drive number select (1:#1,2:#2) ?
(2)
Select a drive number and press
Enter
. The following message will appear.
Interleave number (1/1-8) ?
(3)
Select an interleave number (usually 1) and press
Enter
. The following message is
displayed, and the bad tracks on the hard disk are checked.
[ HDD TYPE ] : CYLINDER = xxxx
[ HDD TYPE ] : HEAD = xx
[ HDD TYPE ] : SECTOR = xx
[[cylinder, head = xxxx xx]]
Summary of Contents for T6400
