Toshiba T6400, Maintenance Manual

Page: 104 / 198

3-50
Format complete
Another format (1:Yes/2:No) ?
(5) If you select Yes, the display will repeat the message in step (3) above. If you select
No, the display returns to the DIAGNOSTICS MENU.
3. COPY option
(1) When COPY is selected, the following message appears.
FLOPPY DISK FORMAT & COPY : Vx.xx.
Type select (0:2DD-2DD,1:2D-2D,2:2D -2HD,3:2HD-2HD) ?
(2) Select a media/drive type number. A message similar to the one below will be
displayed.
Insert source disk into drive x:
Press any key when ready.
(3) Remove the Diagnostic Disk from the FDD, insert the source disk, and press any
key. The following message will appear, indicating the program has started.
[ FDD TYPE ] : TRACK = xxx
[ FDD TYPE ] : HEAD = x
[ FDD TYPE ] : SECTOR = xx
Copy start
[[ track,head = xxx x ]]
(4) Remove the source disk from the FDD, insert a formatted work disk and press any
key. The
[[ track,head = XXX X ]]
message will appear and start
copying to the target disk. When the amount of data is too large to be copied in one
operation the message in step (2) is displayed again.
After the floppy disk has been copied, the following message will appear.
Copy complete
Another copy (1:Yes/2:No) ?
(5) To copy another disk, type 1 and the message in step (1) will be displayed again. If
you type 2, the display returns to the DIAGNOSTICS MENU.