Toshiba T6400, Maintenance Manual

Page: 105 / 198

3-51
4. DUMP option
(1) When DUMP is selected, the following message appears.
DIAGNOSTICS - HARD DISK & FLOPPY DISK DUMP :Vx.xx
Format type select (0:2DD-2DD,1:2D-2D,2:2D -2HD,3:2HD-2HD)?
(2) Select a format type number. Type the number. If 3 is selected, the display will go
to the message in step (5) below.
0:
Displays a dump list for a floppy disk (2DD).
1:
Displays a dump list for a floppy disk (2D).
2:
Displays a dump list for a floppy disk (2HD).
3:
Displays a dump list for a hard disk.
(3) If
0
,
1
, or
2
is selected, the following message will appear.
Select FDD number (1:A/2:B) ?
(4) Select an FDD drive number and the following message will appear.
Insert source disk into drive x:
Press any key when ready.
(5) Remove the Diagnostic Disk from the FDD and insert a source disk. Press any key
and the following message will appear.
-- Max. address --
[Track ] = xxxx
[ Head ] = xx
[Sector] = xx
Track number ??
(6) Type the track number and press
Enter
. The following message will appear.
Head number ?
(7) Type the head number and press Enter . The following message will appear.
Sector number ??
(8) Type the sector number and press
Enter
. The specified dump list will be displayed.
(9) After a dump list appears on the screen, the following message will appear.
Press number key (1:up,2:down,3:end) ?
1:
Displays the next sector dump.