Toshiba SureMark 4610 2CR Hardware Manual Download

Page: 22 / 70

Driver/API

4690 API

JavaPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later

Direct IO

RS232

Ethernet

WiFi

Ethernet

WiFi

SUSE Linux

Enterprise 11

SP1 (SLE 11)

All

RS232

Ethernet

WiFi

PC DOS 2000

RS232

Note:
1. Toshiba 4610 Ethernet Printer iOS SDK is supported with iOS 8.x or later for use with the

Ethernet and WiFi interface adapters.

2. Toshiba 4610 Ethernet Printer Android SDK is supported with Android 4.0 or later for use

with the Ethernet and WiFi interface adapters.

3. Only those items listed are supported.

Hardware requirements

SureMark printers work with the following systems:
• 4694 systems

• 4695 systems (RS-232 connection only and with power supply)

• PC or other store controller with an RS-232, USB, WiFi, or Ethernet port

• SurePOS 100 Series systems

• SurePOS 300 Series systems

• SurePOS 500 Series systems

• SurePOS 700 Series systems

• Self Checkout solution

• AnyPlace

™

Kiosk

• TCx

™

Wave

• TCx700

• TCx300

• iOS, Android, and Windows mobile devices

Identifying the controls and indicators

This section contains information on the controls and indicators of the 4610 Model 2CR and 2NR

printers. Figure 7 provides a diagram of these indicators and controls.

4610 Hardware Guide for Models 2CR and 2NR

Summary of Contents for SureMark 4610 2CR







































































Search results

Summary of Contents for SureMark 4610 2CR

Reviews:

Related manuals for SureMark 4610 2CR

Brands by name

Popular brands

Toshiba SureMark 4610 2CR, Hardware Manual

Search results

Summary of Contents for SureMark 4610 2CR

Reviews:

Related manuals for SureMark 4610 2CR

Brands by name

Popular brands