Toshiba SureMark 4610 2CR, Hardware Manual

Page: 23 / 70

A
B
C
F
E
D
Figure 7. Indicators and controls
Device Description
A
Paper door release button
B
Paper feed button; press to advance the customer receipt
paper
C
Paper supply LED indicator (see Table 4)
D
Printer ready LED indicator (see Table 5)
E
Document presence LED indicator (see Table 6)
F
Document feed button; press to advance the document
Table 4 describes the LED indicators that show the status of the paper supply:
Table 4. Paper supply LED Indicator
LED Indicator (
C
)
Amber (orange) On Paper out
Off Paper sufficient
Blinking Critically low paper supply
Table 5 describes the LED indicators that communicates the printer status:
Table 5. Printer ready LED indicator
Printer ready (
D
)
Amber
(orange)
Blinking (0.5s
on / 0.5s off)
Station not ready; recoverable error: paper jam, cover open,
cutter jam
Blipping (0.25s
on / 1.75s off)
Offline or hardware failure: Cannot communicate with
paper motion sensor, or the thermal printhead, MLC or IFC
problem
Chapter 1. Introducing the SureMark 4610 Models 2CR and 2NR printers
23