background image

Notices

This information was developed for products and services offered in the U.S.A.
Toshiba Global Commerce Solutions may not offer the products, services, or features discussed

in this document in other countries. Consult your local Toshiba Global Commerce Solutions

representative for information on the products and services currently available in your area. Any

reference to a Toshiba Global Commerce Solutions product, program, or service is not intended

to state or imply that only that Toshiba Global Commerce Solutions product, program, or service

may be used. Any functionally equivalent product, program, or service that does not infringe

any Toshiba Global Commerce Solutions intellectual property right may be used instead.

However, it is the user's responsibility to evaluate and verify the operation of any non-Toshiba

Global Commerce Solutions product, program, or service.
Toshiba Global Commerce Solutions may have patents or pending patent applications covering

the subject matter in this document. The furnishing of this document does not give you any

license to these patents. You can send license inquiries, in writing, to:
Toshiba Global Commerce Solutions

Attn: General Counsel

3901 South Miami Blvd.

Durham, NC 27703

United States of America
The following paragraph does not apply to the United Kingdom or any other country where

such provisions are inconsistent with local law: TOSHIBA GLOBAL COMMERCE SOLUTIONS

PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain

transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are

periodically made to the information herein; these changes will be incorporated in new editions

of the publication. Toshiba Global Commerce Solutions may make improvements and/or

changes in the product(s) and/or program(s) described in this publication at any time without

notice.
Toshiba Global Commerce Solutions may use or distribute any of the information you supply in

any way it believes appropriate without incurring any obligation to you.
Any references in this information to non-Toshiba Global Commerce Solutions Web sites are

provided for convenience only and do not in any manner serve as an endorsement of those Web

sites. The materials at those Web sites are not part of the materials for this Toshiba Global

Commerce Solutions product and use of those Web sites is at your own risk.
Information concerning non-Toshiba Global Commerce Solutions products was obtained from

the suppliers of those products, their published announcements or other publicly available

sources. Toshiba Global Commerce Solutions has not tested those products and cannot confirm

the accuracy of performance, compatibility or any other claims related to non-Toshiba Global

Commerce Solutions products. Questions on the capabilities of non-Toshiba Global Commerce

Solutions products should be addressed to the suppliers of those products.
This information is for planning purposes only. The information herein is subject to change

before the products described become available.

©

 Copyright Toshiba Global Commerce Solutions, Inc. 2017

55

Summary of Contents for SureMark 4610 2CR







































































Reviews: