Toshiba Stratagy Flash Installation And Maintenance Manual Download Page 230

Page: 230 / 260

Maintenance, Upgrades and Troubleshooting

Tools

11-8

Stratagy I&M 06/02

Trace Filter Setup Screen

Figure 11-2 Trace Filter Setup Screen with System Defaults

The following fields appear on the screen:

Categories

Categories/classes of the traced records. Use the spacebar to toggle between Yes for inclusion of data or
No for exclusion.

Detail

Detail system information.

Note

Since this information is very detailed and complex, it is only useful for
advanced technical personnel trying to debug the system.

Normal

General system activities including digits dialed and boxes executed.

Call Activity

Log ins, log outs, messages received, and messages retrieved.

Traffic

Information concerning system load and possible problems caused by the load.

System

Control flow between functions.

Error

Abnormal conditions, faults, exceptions, etc.

Threads

Program processes. Use the spacebar to toggle between Yes for inclusion of data or No for exclusion.

Main

System messages and trace events relating to the overall system.

Interface

Communication protocol between the Stratagy and Stratagy Admin.

Event

Anything that happens to the Stratagy from outside the system (e.g., detects voice,
dial tones, ringing, etc.).

Rover

Actions that the Stratagy takes (e.g., notifications and internal scheduling).

Watch

Timers, system self-monitoring.

SMDI

SMDI information.

3248

Summary of Contents for Stratagy Flash





































































































































































































































































Search results

Summary of Contents for Stratagy Flash

Reviews:

Related manuals for Stratagy Flash

Brands by name

Popular brands

Toshiba Stratagy Flash, Installation And Maintenance Manual

Search results

Summary of Contents for Stratagy Flash

Reviews:

Related manuals for Stratagy Flash

Brands by name

Popular brands