manualshive.com logo in svg

Toshiba Satellite X200, Maintenance Manual

Share
Download
Toshiba Satellite X200 Maintenance Manual Download Page 98

3.8 FDD Test 

3.  Tests and Diagnostics 

3. 7 FDD Test 

NOTE:  Before running the FDD test, prepare a formatted work diskette (1.44 MB).  
Remove the diagnostics diskette and insert the work diskette into the FDD.  The contents of 
the floppy diskette maybe erased. 

The Floppy Disk Test includes three subtests of the: 

1.

 

Sequential seek/verify function (Range: Track 0 ~ 79) 

2.

 

Funnel code seek/verify function (Range: Track 0 ~ 79) 

3.

 

Write/Read/Compare pattern function (Range: Track 75 ~ 79) 

NOTE:  The write-protected device of this formatted diskette should be “Disable”. 

 

The subtests run automatically. 

NOTE: Press “Esc” key can skip the current subtest. 

 

The screen should display as below, indicating whether the subtests pass or fail when finished. 

 

Satellite X200 / X205 

 

Series Maintenance Manual

 

3-13  

Summary of Contents for Satellite X200



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands