manualshive.com logo in svg

Toshiba Satellite X200, Maintenance Manual

Share
Download
Toshiba Satellite X200 Maintenance Manual Download Page 17

1  Hardware Overview 

1.1  Features

 

1-4  

[CONFIDENTIAL]

Satellite X200/ X205 Series Maintenance Manual 

•

 

Delta 180W adapters 

•

 

Output voltage: 19Vdc 

•

 

Input Voltage/Frequency range: 90-264Vac, 47-63Hz 

‰

 

Display 

•

 

17” (16:10) TFT screen with a resolution of 1440 horizontal x 900 vertical 
pixels, CSV VA, high brightness approximately 200nits, WXGA+ 

•

 

17” (16:10) TFT screen with a resolution of 1680 horizontal x 1050 vertical 
pixels, CSV, brightness approx 150nits, WSXGA+ 

‰

 

Multiple digital media card slot 

•

 

Supports xD, SD, miniSD, MS, MS Pro, and MMC 

‰

 

Universal Serial Bus (USB) 

The computer has three Universal Serial Bus (USB) ports that comply with the USB 
2.0 standard, which enable data transfer speeds more than 40 times faster than USB 
1.1 (which this computer also supports.) The USB drives may be used to transfer data 
at Low, Full, and high speeds. 

‰

 

Bluetooth module 

Some computers in this series are equipped with Bluetooth functionality (Version 2.0 
+ EDR) with antenna. Bluetooth is a short-range wireless technology used to create 
PANs (Personal Area Networks) among your devices, and with other nearby devices 
like mobile computers, mobile phones, and digital cameras. 

‰

 

OS 

•

 

Windows Vista Home Basic/ Home Premium (32/64 bit support) 

•

 

Windows Vista Business (32/64 support) 

•

 

Vista Premium Logo 

 

Summary of Contents for Satellite X200



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands