manualshive.com logo in svg

Toshiba Satellite X200, Maintenance Manual

Share
Download
Toshiba Satellite X200 Maintenance Manual Download Page 96

3.6 Fan ON/OFF Test 

3.  Tests and Diagnostics 

3.5 Fan ON/OFF Test 

The fan test allows the user to test aurally whether the fan is working. And follow the below 
procedures for this test: 

Š

 

The computer will let the fan be “ON” after any key pressed. Feel the wind or 
listen the rotating sound to check whether the fan is working or not. 

NOTE:  Remember to approach fan outlet that is near right side of unit whether fan is 
“ON”. 

Š

 

The computer will stop the fan working after any key pressed. Feel the wind or 
listen the sound to check if the fan is “OFF”. 

The screen should display as below, indicating whether the test is passed or failed after the 
question. 

 

 

 

Satellite X200 / X205 

 

Series Maintenance Manual

 

3-11  

Summary of Contents for Satellite X200



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands