Toshiba Satellite Pro X200 Series User Manual Download

Page: 99 / 228

Satellite X200/Satellite Pro X200

4-21

Operating Basics

3. Grasp the drawer gently and pull until it is fully open.

Pulling the drawer open

4. Lay the disc, label side up, in the drawer.

Inserting a disc

5. Press gently at the centre of the disc until you feel it click into place. The

disc should lie below the top of the spindle, flush with its base.

6. Push the centre of the drawer to close it. Press gently until it locks in

place.

Be careful not to touch the lens or the area around it. Doing so could cause
the drive to malfunction.

If the disc is not seated properly when the drawer is closed, it might be
damaged. Also, the drawer might not open fully when you press the eject
button.

Summary of Contents for Satellite Pro X200 Series





































































































































































































































Search results

Summary of Contents for Satellite Pro X200 Series

Reviews:

Related manuals for Satellite Pro X200 Series

Brands by name

Popular brands

Toshiba Satellite Pro X200 Series, User Manual

Search results

Summary of Contents for Satellite Pro X200 Series

Reviews:

Related manuals for Satellite Pro X200 Series

Brands by name

Popular brands