background image

Satellite X200/Satellite Pro X200

10-15

Troubleshooting

HD DVD-R or HD DVD-ROM drive supporting disc recording

For more information, refer to Chapter 5, 

About the HD DVD

.

Problem 

Procedure

You cannot access a 
CD/DVD/HD DVD in the 
drive

Make sure the drive's drawer is securely closed. 
Press gently until it clicks into place.
Open the drawer and make sure the disc is  
properly seated. It should lie flat with the label  
facing up.
A foreign object in the drawer could block laser 
light from reading the disc. Make sure there is no 
obstruction. Remove any foreign object.
Check whether the CD, DVD, or HD DVD is dirty. 
If it is, wipe it with a clean cloth dipped in water 
or a neutral cleaner. See the 

Media care

 section 

in Chapter 4 for details on cleaning.

Some CD/DVD/HD 
DVDs run correctly, but 
others do not

The computer's software or hardware 
configuration  may be causing a problem - ensure 
that these configurations match the requirements 
of the CD/DVD/HD DVD media (refer to the CD's, 
DVD's, or HD DVD's documentation if available).
HD DVD:

HD DVD-ROM (Single-sided   
Single-Layer), HD DVD-ROM 
(Single-sided Dual-Layer), HD 
DVD-R (Single-sided Single-
Layer), HD DVD-R (Single-sided 
Dual-Layer), HD DVD-Video, HD 
DVD (Twin format disc) 

DVD:

DVD-ROM, DVD-Video, DVD-R/-R 
(Dual Layer), DVD+R/+R (Double 
Layer), DVD-RW, DVD+RW, DVD-
RAM

CD:

CD-DA, CD-Text, Photo CD. 
(single/multi-session), CD-ROM 
Mode 1, Mode 2, CD-ROM XA 
Mode 2 (Form1, Form2), Enhanced 
CD (CD-EXTRA), Addressing 
Method 2

For DVD Videos, you should check the region 
coding on the DVD to ensure that it matches that 
on the HD DVD-ROM drive. For reference, region 
codes are listed in the Optical disc drives section 
in Chapter 2, The Grand Tour in the Online 
manual.

Summary of Contents for Satellite Pro X200 Series





































































































































































































































Reviews: