Toshiba Satellite P25 User Manual Download

Page: 189 / 232

189

If Something Goes Wrong

Resolving a hardware conflict

5.375 x 8.375 ver 2.3

Resolving PC Card problems

Here are some common problems and their solutions:

The slots appear to be dead. PC Cards that used to work
no longer work.

Check the PC Card status:

Click

Start

Click

My Computer

icon with the secondary button,

then click

Properties

The System Properties dialog box appears.

Click the

Hardware

tab.

Click the

Device

Manager

button.

Double-click the category listed as

PCMCIA adapter

The operating system displays your PC Card’s Properties
dialog box, which contains information about your PC
Card configuration and status.

The computer stops working (hangs) when you insert a
PC Card.

The problem may be caused by an I/O (input/output) conflict
between the PCMCIA socket and another device in the
system. Use Device Manager to make sure each device has its
own I/O base address. See

“Fixing a problem with Device

Manager” on page 177

for more information.

Since all PC Cards share the same socket, each card is not
required to have its own address.

Hot swapping (removing one PC Card and inserting
another without turning the computer off) fails

Follow this procedure before you remove a PC Card:

Click the

PC Card

icon in the system tray.

Click

Stop

xxxx

, where

xxxx

is the identifier for your PC

Card.

Summary of Contents for Satellite P25









































































































































































































































Search results

Summary of Contents for Satellite P25

Reviews:

Related manuals for Satellite P25

Brands by name

Popular brands

Toshiba Satellite P25, User Manual

Search results

Summary of Contents for Satellite P25

Reviews:

Related manuals for Satellite P25

Brands by name

Popular brands