background image

Dell™ Latitude™ 13 Service Manual

 

 

Notes, Cautions, and Warnings 

If you purchased a Dell™ n Series computer, any references in this document to Microsoft® 

Windows

® 

operating systems are not applicable. 

Information in this document is subject to change without notice. 

© 2010 Dell Inc. All rights reserved.

 

Reproduction of this material in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

March 2010     Rev. A00

 

Working on Your Computer

  

Removing and Replacing Parts

 

Specifications

 

System Setup

 

Diagnostics

  

 

 

NOTE:

 A NOTE indicates important information that helps you make better use of your computer. 

CAUTION: 

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, 

and Latitude 

are trademarks of Dell Inc.; 

Intel

,

 Core

, and

 Celeron

 are either trademarks or 

registered trademarks of Intel Corporation; 

Microsoft

Windows,

 

Windows Vista

,

 

and the

 Windows Vista

 start button

 

are either trademarks or 

registered trademarks of Microsoft Corporation in the United States and/or other countries; 

Bluetooth

 is a registered trademark of Bluetooth SIG, 

Inc.

Summary of Contents for Latitude 13















































Reviews: