9
Setting up your computer and getting started
RG 5.375 x 8.375 ver 2.3.2
9
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
10
Gently press down on the memory module connector
until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Inserting the memory module
Avoid touching the connectors on the memory module or on the
computer. Grease or dust on the connectors may cause memory
access problems.
11
Replace the memory slot cover.
12
Replace the screws and tighten them.
13
Turn the computer over and reconnect any cables you
removed.
14
To verify that the computer correctly recognizes the
memory:
❖
Click
Start
, then click
Control Panel
.
❖
Click
Performance and Maintenance
.
❖
Click
System
.
❖
The
General
tab view automatically appears and
shows the recognized memory.
15
If the computer does not recognize the memory, turn off
the computer, remove the memory slot cover, and make
sure the memory module is seated properly, as described
in step 10.
