Toshiba Satellite 1955 Series Resource Manual Download | Manualshive

Page: 42 / 56

background image

42

Regulatory information

RG 5.375 x 8.375 ver 2.3.2

Device Authorization

This device obtains the Technical Regulation Conformity Certification and
the Technical Conditions Compliance Approval, and it belongs to the
device class of radio equipment of low-power data communication system
radio station stipulated in the Radio Law and the Telecommunications
Business Law of Japan.

The Name of the radio equipment: MPC13A-20/R

JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS
EQUIPMENT

Approval Number: D01-1128JP

TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018,
03GZDA0017

The following restrictions apply:

❖

Do not disassemble or modify the device.

❖

Do not install the embedded wireless module into other device.

Interference Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference by one or more of
the following measures:

❖

Reorient or relocate the receiving antenna.

❖

Increase the distance between the equipment and the receiver.

❖

Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.

❖

Consult the dealer or an experienced radio/TV technician for help.

Toshiba is not responsible for any radio or television interference caused by
unauthorized modification of the devices included with this Toshiba
Wireless LAN Mini PCI Card, or the substitution or attachment of
connecting cables and equipment other than specified by Toshiba.

The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.

«
...
40
41
42
43
44
...
»

Summary of Contents for Satellite 1955 Series

























































Reviews:

No comments

Related manuals for Satellite 1955 Series

TravelMate 4100 Series

Brand: Acer Pages: 86

TravelMate 4060

Brand: Acer Pages: 69

Toughbook CF-Y5LWEZABM

Brand: Panasonic Pages: 106

Brand: Medion Pages: 306

Brand: HP Pages: 96

Brand: HP Pages: 126

Brand: HP Pages: 116

Brand: HP Pages: 70

Brand: HP Pages: 124

Brand: HP Pages: 162

Brand: HP Pages: 70

Brand: HP Pages: 86

Brand: HP Pages: 62

Brand: HP Pages: 105

Brand: HP Pages: 90

Brand: HP Pages: 90

Brand: HP Pages: 67

Brand: HP Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands