Toshiba Satellite 1955 Series Resource Manual Download Page 45 | Manualshive

Page: 45 / 56

background image

45

Regulatory information

RG 5.375 x 8.375 ver 2.3.2

Bluetooth wireless technology Interoperability

Bluetooth™ Cards from TOSHIBA are designed to be interoperable with
any product with Bluetooth wireless technology that is based on Frequency
Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:

❖

Bluetooth Specification Ver.1.1, as defined and approved by The
Bluetooth Special Interest Group.

❖

Logo certification with Bluetooth wireless technology as defined by
The Bluetooth Special interest Group.

Bluetooth wireless technology is a new innovative technology, and TOSHIBA
has not confirmed compatibility of its Bluetooth™ products with all PCs and/
or equipment using Bluetooth wireless technology other than TOSHIBA
portable computers.

Always use Bluetooth™ cards from TOSHIBA in order to enable wireless net-
works over two or more (up to a total of seven) TOSHIBA portable computers
using these cards. Please contact TOSHIBA PC product support on Web site
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or
http://www.pcsupport.global.toshiba.com in the United States for more
information.
When you use Bluetooth™ cards from TOSHIBA close to 2.4 GHz Wireless
LAN devices, Bluetooth transmissions might slow down or cause errors. If
you detect certain interference while you use Bluetooth™ cards from
TOSHIBA, always change the frequency, move your PC to the area outside of
the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74
yards or more) or stop transmitting from your PC. Please contact TOSHIBA
PC product support on Web site http://www.toshiba-europe.com/computers/
tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in
the United States for more information.
Bluetooth™ and Wireless LAN devices operate within the same radio frequency
range and may interfere with one another. If you use Bluetooth™ and Wireless LAN
devices simultaneously, you may occasionally experience a less than optimal
network performance or even lose your network connection. If you should
experience any such problem, immediately turn off either one of your Bluetooth™ or
Wireless LAN. Please contact Toshiba PC product support on web site http://
www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://
www.pcsupport.global.toshiba.com in the United States for more information.

Portugal

Singapore

Spain

Sweden

Switzerland

Thailand

UK

USA

«
...
43
44
45
46
47
...
»

Summary of Contents for Satellite 1955 Series

























































Reviews:

No comments

Related manuals for Satellite 1955 Series

Brand: Gateway Pages: 130

Brand: Gateway Pages: 2

Brand: Gateway Pages: 11

Brand: Gateway Pages: 116

Convertible notebook

Brand: Gateway Pages: 2

Brand: Gateway Pages: 87

Brand: Gateway Pages: 16

Brand: Gateway Pages: 10

Brand: Gateway Pages: 10

Brand: Gateway Pages: 8

Convertible notebook

Brand: Gateway Pages: 74

Brand: Gateway Pages: 138

Brand: Gateway Pages: 24

Brand: Packard Bell Pages: 56

Brand: Acer Pages: 313

Brand: NEC Pages: 28

VersaPro VB VG23T/B-T

Brand: NEC Pages: 24

Brand: NEC Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands