background image

32

Regulatory information

RG 5.375 x 8.375 ver 2.3.2

Physical dimensions

Environmental conditions

Regulatory information

Model: Satellite

®

1955 Series

ReWritable CD/DVD Drives

The computer system you purchased may include a ReWritable CD and/or 
DVD drive(s), among the most advanced data storage technologies 
available. As with any new technology, you must read and follow all set-up 
and usage instructions in the applicable user guides and/or manuals 
enclosed. If you fail to do so, this product may not function properly and 
you may lose data or suffer other damage. 

TOSHIBA AMERICA 

INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND 
SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE 
PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU 
AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL 

Additional 
battery packs

Use as spare or replacement packs to extend the time 
you can operate the computer away from a live elec-
trical outlet

Cable

PORT-Noteworthy

®

 Computer Lock cable to deter 

computer theft

Weight

16.0” model: 9.34 lbs
Actual weight will vary slightly depending on con-
figuration and installed modules

Size

width

 x 

depth

 x 

height

13.86 x 12.90 x 1.92/2.28 inches (dimensions may 
vary)

Operating

Non-operating

Temperature

5° to 35° C (41° to 95° F)

-20° to 65° C (-4° to 149° F)

Relative humidity

20% to 80% non-condensing 10% to 95% non-condensing

Altitude
(relative to sea level)

0 to 3,000 m
(sea level to 9,842 ft.)

0 to 10,000 m
(sea level to 32,808 ft.)

Shock

10G

60G

Vibration

0.5G

1G

Summary of Contents for Satellite 1955 Series

























































Reviews: