68
RemotEye II Management
This menu allows the administrator to view the RemotEye II control parameters.
Users have read-only privileges, whereas the administrators have read/write access.
RemotEye II System Date and System Time
This page shows the options on setting RemotEye II date and time.
Date and Time
These two fields show the current Date and Time of the RemotEye II. This can be
changed to synchronize with a computer, an enquiry from a timeserver (NTP) or can
be set manually. The date value is displayed in the MM/DD/YYYY format (i.e., Jan
18, 2005 is 01/18/2005). The time value is displayed in the hh:mm:ss 24-hour format
(i.e., 8:30 p.m. is 20:30:00).
Synchronize with computer time
This field allows the administrator to synchronize the RemotEye II date and time to
the computer clock, which the end user is using.
Synchronize with NTP server
NTP server IP and correct time zone must be selected to activate this option. After
configuration, the RemotEye II will synchronize its time with the server periodically.
If Daylight Saving Time is enabled, the time will be one hour earlier than NTP server
time.
Set Manually
This field allows the administrator to configure the RemotEye II date and time
manually.
