49
UPS Monitoring
This menu allows the user to view the collected data from the UPS measurements.
The UPS measured parameters are listed below and are allowed only to be read.
UPS Comprehensive View
This page lists the UPS parameters. This page will refresh automatically at a user-
defined rate. To change or view the refresh rate setting, select RemotEye II
Management - HTTP Page Refresh Rates.
UPS Mode
This field shows the present UPS system mode. These readings include: Other, None,
On-Line, Bypass, Battery, Testing, and Output Shutdown.
Input Voltage
This field shows the present UPS input voltage in VAC.
Output Voltage
This field shows the present UPS output voltage in VAC.
Output Load
This field shows the present UPS load in % of kVA.
Battery Capacity Remaining (option)
This field shows the present remaining battery capacity expressed as a percentage of
the battery's full capacity.
Battery Temperature (option)
This field shows the present UPS battery temperature in
o
C.
Input Frequency
This field shows the present UPS input frequency in Hz.
Output Frequency
This field shows the present UPS output frequency in Hz.
Date on RemotEye II
This field shows the RemotEye II date setting. This value is displayed in the
mm/dd/yyyy format.
Time on RemotEye II
This field shows the RemotEye II time setting. This value is displayed in the
hh:mm:ss 24-hour format (i.e. 8:30 p.m. is 20:30:00).
