Toshiba Regza C3000 Series, User Manual

Page: 23 / 196

English
23
1/2 SET UP
Language English
Country UK
Auto tuning
OK
Manual tuning OK
AV connection OK
Picture position OK
MENU
Back
EXIT
Watch TV
Input selection and
AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7
for a clear view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to the
correct
Input socket.
Alternatively press the external source selection button
B
until the picture from connected equipment is shown.
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (
EXT3C ).
An S in the display e.g.
B
2S ( EXT 2S ), indicates the
input is set for an S-Video signal.
Use the Input Selection if the television does not switch
over automatically.
Input selection
1
At any time by pressing
B
a list will appear on
screen showing all stored programmes and
external equipment
. Use
f
and
e
to highlight
and OK to select.
HDMI™ displays equipment connected to Input
HDMI on the back of the television. It is designed
for best performance with 1080i high definition
signals.
PC displays a computer connected to Input
RGB/PC on the back of the television.
This specifies the type of signal going into SCART 2 ( EXT2 )
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press
e
until
AV connection is highlighted, then press OK .
With
z
or
x
select either AV or S-VIDEO as the
required input for EXT2 .
If the colour is missing try the alternative setting.
INPUT signal selection
1
2
AV connection
PC/HDMI1 audio PC
HDMI1 audio Digital
EXT2 input AV
Woofer Internal
MENU Back EXIT Watch TV
1 BBC1
HDMI2
HDMI1
B 3C
B 2 DVD
B
1
4 CH4
3 ITV
2 BBC2
C3000P Eng OM 26/1/07 4:48 pm Page 23