Toshiba Regza C3000 Series, User Manual

Page: 22 / 196

English
22
PC settings – picture position, clock phase,
sampling clock, reset
3
3
Use
z
or
x
to adjust until the picture clears.
In the SET UP menu press
e
until PC Setting is
highlighted.
Press OK to select, then
e
to highlight Clock
phase .
Use
z
or
x
to adjust until the picture clears.
1
2
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
Clock phase
In the SET UP menu press
e
until PC Setting is
highlighted.
Press OK to select, then
e
to highlight
Sampling clock .
1
2
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
Sampling clock Picture position
Connect the PC (as shown in the ‘Connecting a PC’
section) and ensure that a picture is showing on the
television screen. The picture position may now be adjusted
to suit personal preference.
Press
B
to select PC , then select PC Setting
from the SET UP menu.
1
Press OK . Press
f
and
e
to select an option,
then
z
or
x
to adjust the settings.
2
3
In the SET UP menu press
e
until PC Setting is
highlighted.
Press OK to select, then e to highlight Reset .
Press OK .
1
2
To return to the original factory settings.
Reset
SET UP
Language English
Country UK
AV connection
OK
PC Setting OK
MENU
Back
EXIT
Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU Back EXIT Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU
Back
EXIT
Watch TV
NOTE: When a PC is connected using HDMI none of
these functions will be available.
C3000P Eng OM 26/1/07 4:48 pm Page 22