Toshiba RBC-AMTU31-E, Owner'S Manual

Page: 5 / 32

Owner’s Manual
4-EN
2
Part names and functions of the remote
controller
This remote controller can control up to 16 indoor units.

Display section
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
•
blinks on the display of the remote controller the first time the power
switch is turned on.
• The initial settings progress while is blinking. Start to use the remote
controller after has disappeared.
NOTE
The LCD may temporarily be blurred due to static electricity.
1
Operation mode indicator
Indicates the operation mode selected.
2
SETTING indicator
Displayed when setting the timer or other
functions.
3
TEST run indicator
Displayed during test run.
4
Louver position display
Indicates the louver position.
5
Swing indicator
Displayed during up / down movement of the
louver.
6
Central control indicator
Displayed when the air conditioner is controlled
centrally and used with central control devices
such as the central remote controller.
If the use of the remote controller is prohibited by
the central control,
blinks when the ON /
OFF, MODE, or TEMP. button on the remote
controller is pushed, and the buttons do not
function. (Settings that can be configured on the
remote controller differ depending on the mode of
the central control. For details, read the Owner’s
Manual of the central remote controller.)
7
Louver lock indicator
Displayed when a louver is locked.
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
Display
section
Operation
section
1
16
18
21
3
23
2
22
20
12
5 4
15
14
10
6 8 9 7
11
13
19
17