Toshiba RBC-AMTU31-E, Owner'S Manual

Page: 9 / 32

Owner’s Manual
8-EN
3
Basic operation
When you use the air conditioner for the first time or change the settings, follow the procedures below.
From next time, pushing the
button starts running of the air conditioner with the chosen settings.

Preparation
Turn on the power switch
• When turned on, the separation line appears and blinks on the remote controller display.
* The remote controller will not work for about 3 minute after turning on the power. This is not a
malfunction.
REQUIREMENT
• Keep the power switch turned on during use.
• When you resume using the air conditioner after a long period of disuse, turn on the power switch at least 12
hours before starting running.
 Operations
1
Push the button.
The operation lamp lights up.
2
Push the button to select a operation
mode.
Each time you push the button, the operation
mode and its icon change in the following order:
Depending on the type of unit connected, the
operation modes that cannot be set will not be
displayed.
3
Push the button to stop running.
The operation lamp turns off.
 Changing the fan speed
1
Push the button to select a fan speed.
• Each time you push the button, fan speed and
its indication change in the following order:
(“
Auto” cannot be selected in the FAN
mode.)
* The available fan speeds vary depending on the
indoor unit connected.
• The temperature sensor detects the return air
temperature at the indoor unit, which may
slightly differ from the actual room temperature
depending on installation condition. Set
temperature is a target of room temperature.
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
1, 3
2
(Dehumidify)
AUTO
Dry
Fan Cool
Heat
AUTO
High
Low
Low+ Medium