Toshiba RBC-AMTU31-E, Owner'S Manual

Page: 7 / 32

Owner’s Manual
6-EN
 Operation section
Once the settings have been configured, all you need to do is push the button from then on.
1
button
Turns on the unit when pushed, and turns off when
pushed again.
2
Operation lamp
Lights up during running.
Blinks when an abnormality occurs or the
protective device activates.
3
button
Adjusts the set temperature.
Select the desired set point by pushing
.
4
button (Fan speed select button)
Selects the desired Fan speed.
5
button (Operation mode select button)
Selects desired operation mode.
6
button
Use when a ventilator (commercially-available) is
connected. Push the button to turn on / off the
ventilator. Turning on / off the air-conditioner also
turns on / off the ventilator.
*
No ventilator is connected if
“ ” appears on
the remote controller display after pushing the
button.
7
button (Unit / Louver select button)
Selects a unit number (left) and louver number
(right).
UNIT button:
If two or more indoor units are controlled by one
remote controller, use this button to select a unit to
adjust its air blow direction.
LOUVER button:
Selects a louver to control when adjusting the
louver lock setting or wind direction setting
separately for each louver.
8
button (Power save operation)
Use to initiate power saving mode.
9
button
Use to select automatic swing or fixed louver
position.
4 2
10
11
12
1
5
8 9
3
6
7
UNIT LOUVER
SWING/FIX