Owner’s Manual
11-EN
5
Louver direction
Only types of unit having a wind direction adjustment function can be controlled.
For precautions for use of the air conditioner, refer to the air conditioner owner’s manual.
◆
To set the louver direction
1
Push the
button during running.
The louver direction changes with each push of
the button.
◆
To start swinging
1
Push the
button repeatedly to set the
louver direction to the lowest position, then
push
again.
The SWING
indicator is displayed and the
louver begins swinging.
◆
To stop swinging
1
Push the
button at the desired
position while the louver is swinging.
• Push the
button repeatedly to change
the louver position again.
In this case, push the
button again after 2
seconds.
* In COOL / DRY operation, the louver does not
stop as it directs downward. If stopping the
louver as it directs downward during swing
operation, it stops after moving to the third
position from the highest position.
▼
For heating
Point the louver downward.
If not pointing downward, hot
air may not reach the floor.
▼
For cooling
Point the louver horizontally.
If pointing downward, dew
may form on the surface of
the air discharge port and
may drop down.
▼
For fan
Select a wind direction.
▼
In all operations
SWING/FIX
Initial setting
Initial setting
Initial setting
SWING/FIX
SWING/FIX
Repeat
* However, even if the
button is pushed
while the louver is swinging, one of the
indications below may sometimes be displayed
and may not set the louver to the highest
position.
▼
Indications when swinging is stopped
▼
Indications when swinging is stopped
SWING/FIX
SWING/FIX
SWING/FIX
FAN / HEAT
COOL / DRY
SWING/FIX
FAN / HEAT
operation
COOL / DRY
operation
Summary of Contents for RBC-AMTU31-E
Page 29: ...Owner s Manual 28 EN ...
Page 30: ...Owner s Manual 29 EN ...
Page 31: ...Owner s Manual 30 EN ...
Page 32: ...DEB9509002 ...
