No. Part name
Procedure
Remarks
⑦
1. Detachment
1) Remove the drain hose or drain cap and then
extract the drain water accumulated in the drain pan.
2)
Remove the screw A fixing the bottom plate.
(
9
positions)
Loosen the screw B. (
4
positions)
3)
Slide the bottom plate (drain side) to the arrow
direction and then remove the panel.
4)
Loosen
the screw
of the drain pan supporter,
and
turn the drain pan supporter.
5)
Lower the drain pan of the drain socket side,
and
remove it to the arrow direction slowly.
Drain pan
2. Attachment
1) Put back the drain pan, and turn back the drain pan
supporter and fix it with the screws.
NOTE
When removing the drain hose or drain cap, be sure
to take the drain water with a bucket, etc.
CAUTION
When removing the drain pan, do not hold the
drain socket. (Water leakage may occur.)
Bottom plate (Drain side)
Screw
B
Screw A
Drain pan
Drain
socket
Drain pan supporter
Drain pan pull-out
direction.
2
)
Attach the bottom plate (drain side) to the original
position.
Sensor
TC,
TCJ
1. Detachment
1)
2)
Perform 1 of
①
to
remove
the electrical parts box cover.
Loosen the fixing screws of the inspection cover and
remove the inspection cover
.
3) Remove the connectors of the wires of TC sensor
and
TC
J
sensor
from the control P.C. board.
CN101 : TC sensor (2P, Black)
CN102 : TCJ sensor (2P, Red)
Screw
Inspection cover
⑧
TCJ sensor
(Red)
TC sensor
(Black)
Control P.C.board
MCC-1643
sensor clip
sensor holder
TC Sensor
CN101
TCJ Sensor
CN102
2. Attachment
1)
Attach the TC sensor and TCJ sensor to the original
position.
2)
Attach the inspection cover as before.
3)
Attach
the wires of TC sensor, and TCJ sensor as
before.
4
)
Attach the electrical parts box cover as before.
4
)
Remove the sensor
from the
sensor holder.
- 93 -
