4-2 Replace to new noise filter PCB
[Step1]
Remove the earth screw from metal plate.
[Step2]
Remove four wiring (red and white) which are connected in PCB.
Notice : These wiring have lock mechanism. So when remove the wiring, it need to push the lock which
is set side of connector.
[Step3]
Unlock the four PCB spacers and remove.
[Step4]
Replace the new noise filter PCB to PCB spacer and connect wiring and tighten screw same as step 1 to 3.
Notice : Before replace the new noise filter PCB, check the number which is described in label on PCB
Old PCB : 11178780
01
Alternate new PCB:
11178780
02
Photo of motor earth lead before repairing
Photo of motor earth lead after repairing
1. Remove the ferrite core
2.Tie the extra length of earth
lead by tie band
Step1
Step2
Step3
Step3
Old PCB
: 11178780
01
Alternate new PCB
:
11178780
02
- 97 -
