TS-L532A (SD-R6472) Rev.1.1
24 / 28
(5) When the release button is pressed, the indicator blinks at intervals of 0.4 seconds until the drawer
is released, then it is turned off.
Figure 19 Release
(6) The indicator blinks at intervals of 3.25 seconds during the DVD+RW background formatting, then is
turned off when formatting is completed.
Figure 20 DVD+RW Background Formatting
11. Emergency Release
If the drawer is not released, even after the release button is pressed, take the following steps.
(1) Turn off the drive.
(2) Insert a solid, thin rod (a paper clip, etc.) into the Emergency Release hole as shown in
Figure 20. Push firmly and remove, and the drawer will be released.
(3) Remove the disc, then close the drawer gently.
Figure 21 Emergency Release
3.25 s
Light Off
Background formatting completed
0.4 s
Light Off
Released
15 mm
Diameter 1.0 mm
Summary of Contents for R6472 - DVD±RW Drive - IDE
Page 16: ...TS L532A SD R6472 Rev 1 1 10 28 Unit mm Figure 5 1 External Dimensions ...
Page 17: ...TS L532A SD R6472 Rev 1 1 11 28 Unit mm Figure 5 2 External Dimensions ...
Page 19: ...TS L532A SD R6472 Rev 1 1 13 28 Figure 6 Configuration ...
Page 33: ...TS L532A SD R6472 Rev 1 1 27 28 Annex 1 ...
