Toshiba Qosmio F60 Series, Maintenance Manual

Page: 307 / 466

エラー
!
スタイルが定義されていません。 エラー
!
スタイルが定義されていません。
エラー
!
スタイルが定義されていません。
Replacement Procedures
エラー
!
ス
Screw Tightening Torque
Use the following torque when tightening screws.
CAUTION: Overtightening may damage screws or parts. Undertightening may allow
screws to loosen (and possibly fall out) causing a short circuit or other
damage.
NOTE: To tighten screws quickly and accurately, an electric screwdriver is
recommended.

M2.0 (2mm) 0.167 N·m (1.7 kgf·cm)

M2.5 (2.5mm) 0.294 N·m(3.0 kgf·cm)

M3.0 (3mm) 0.549 N·m (5.6 kgf·cm)
NOTE: To prevent damage to THIN HEAD screws, use type 0 bit philips screwdriver.
Use, however, the PH point size “1” screwdriver for screws fixing the memory
slot cover and keyboard. Press along the axis of the screwdriver while turning
the screw. This is because the contact area between the screw and driver is less
than for a pan head screw (standard pan-shaped screw head).
QOSMIO F60 Maintenance Manual (960-796) [CONFIDENTIAL] 4-9