Toshiba Portege M500 Maintenance Manual Download Page 219

Page: 219 / 374

3.30 SETUP

3 Tests and Diagnostics

(c)

Execute-Disable Bit Capability

Selects the function to reports whether the CPU Execute-Disable Bit is
available or not to OS. When the CMOS is damaged, the default is

Available

When

Home

is pressed, the setting is not changed and the setting is kept.

Available

Reports that the function is available.

Not Available

Reports that the function is not available. (Default)

(d)

Virtualization Technology

Virtualization Technology sets enable or disable of the Intel Virtualization
Technology installed in the CPU.

Intel Virtualization Technology is the technique that allows one machine to
operate as multiple virtual machines.

Enabled

Enables Virtualization Technology.

Disabled

Disables Virtualization Technology. (Default)

(e)

Auto Power On

Use this option to set a time and date for automatic power on and enable or
disable the ring indicator feature.

Alarm Date Option

appears only when

Alarm Time

is enabled.

*Only for LAN Model

Alarm Time

is set in the sequence of hours and minutes. Seconds cannot be

changed.

Alarm Date Option

is set in the sequence of month and day. If

Alarm Date is set to Disabled, the computer will be powered on at the same
time every day. Press

↓

to move the cursor to the right and

↑

to move the

cursor to the left when you set the date and time.

NOTE: 1. Do not remove the AC adapter and battery pack at the same time when you use

this feature. If you do so, data saved by the resume function will be lost. You
must also reset this option.

2. When a password is set in Password Security, the system is in standby mode,

the Timer on function (Auto Power PN) is set and the system is booted,
“Password =” is displayed. When the password set in Password Security is
input, the computer returns to Windows from standby mode.

3. This function is effective only once, it is released after booting up.

Alarm Time

= 00:00:00

Alarm Date Option

= Disabled

Wake-up on LAN

= Disabled*

OPTIONS

PORTÉGÉ M500 Maintenance Manual (960-559)

[CONFIDENTIAL]

3-99

Summary of Contents for Portege M500























































































































































































































































































































































































Search results

Summary of Contents for Portege M500

Reviews:

Related manuals for Portege M500

Brands by name

Popular brands

Toshiba Portege M500, Maintenance Manual

Search results

Summary of Contents for Portege M500

Reviews:

Related manuals for Portege M500

Brands by name

Popular brands