Toshiba Portege M500 Maintenance Manual Download Page 217

Page: 217 / 374

3.30 SETUP

3 Tests and Diagnostics

PORTÉGÉ M500 Maintenance Manual (960-559)

[CONFIDENTIAL]

3-97

(c)

User Password

This item sets User password.
For details on setting user password, refer to the User’s Manual.

(d)

Master Password

This item sets the Master HDD password.
This can be set

Master

User

is set in the HDD password Mode. For details,

refer to the User’s Manual.

Boot Priority

This tab sets the priority for booting the computer and the priority for the built-in
HDD or optional secondary HDD.

(a)

Boot Priority

HDD

→

FDD

→

CD-ROM

→

LAN:

The computer looks for bootable files
in the following order: HDD, FDD, CD-
ROM and LAN. (Default)

FDD

→

HDD

→

CD-ROM

→

LAN:

The computer looks for bootable files
in the following order: FDD, HDD, CD-
ROM and LAN.

HDD

→

CD-ROM

→

LAN

→

FDD:

The computer looks for bootable files
in the following order: HDD, CD-ROM,
LAN and FDD.

FDD

→

CD-ROM

→

LAN

→

HDD:

The computer looks for bootable files
in the following order: FDD, CD-ROM,
LAN and HDD.

CD-ROM

→

LAN

→

HDD

→

FDD:

The computer looks for bootable files
in the following order: CD-ROM, LAN,
HDD and FDD.

CD-ROM

→

LAN

→

FDD

→

HDD:

The computer looks for bootable files
in the following order: CD-ROM, LAN,
FDD and HDD.

NOTE: CD-ROM refers to a DVD-ROM&CD-R/RW drive or DVD Super Multi drive.

Summary of Contents for Portege M500























































































































































































































































































































































































Search results

Summary of Contents for Portege M500

Reviews:

Related manuals for Portege M500

Brands by name

Popular brands

Toshiba Portege M500, Maintenance Manual

Search results

Summary of Contents for Portege M500

Reviews:

Related manuals for Portege M500

Brands by name

Popular brands