–
89
–
No.
⑦
Part name
Procedure
Remarks
Fan motor,
Fan
1. Detachment
1) Perform 1 of
①
to open the electrical parts box cover.
2) Perform 1 of
⑥
.
3) Remove the connectors of the wires of the fan motor
from the fan control P.C. board.
CN703 : Fan motor (Black wire)
CN704 : Fan motor (Whit
e
wire)
CN705 : Fan motor (Red wire)
4) Remove the fixing screws A (M8 x 20, 8 pcs) .
and loosen the fixing screws B (M8 x 20, 2 pcs) .
(The fan motor is in the temporary hanging state by
the fixing plate.)
5) Remove the fan assembly.
6) Remove the fixing screws C (M8 x 20, 8 pcs) .
7) Loosen the hexagonal bolt of the fan and
pull out the fan from the shaft.
8) Remove the fixing screws D (4 pcs) from the fan case
and remove the nose plate and then take out the fan.
9) Remove the fixing screw of ferrite core and unscrew
the earth.
10) Remove the fixing screws E(M8 x 20, 2 pcs) and
remove the motor fixing plate.
Wires of
the fan
motor
CN703
CN704
CN705
Fixing screw C
Screw with
hexagonal bolt
Fixing screw B
Fixing screw A
Fan assembly
Nose plate
Fixing screw D
Ferrite core
Fixing screw E
Motor fixing plate
CAUTION
Weight of the fan assembly is about
30
k
g. Handle it by 2 workers.
Earth screws
AMP Air Conditioning
www.ampair.co.uk | [email protected]
